'Other' Constructional and Allied Systems Info & Downloads
Der Junge Konstrukteur Construction Sets
Der Junge Konstrukteur was a Meccano-like Construction system with many special parts. It was produced in East Germany by HW from 1955 to 1972.
Manufacturer / Distributor
Hans Wünsch, Mühlentrasse 2 und 20, Niederweiss/Sachen, East Germany
Info from the Metal Constructional Systems Database for DER JUNGE KONSTRUKTEUR (Ref:DJK)
Hans Wünsch
Hole pitch <12.7mm
Former East Germany
1956 to circa 1972
Steel
M4
single-tapped
M4
25 (see comment *1)
80
12.5
4.2
4.1
4.0
Nuts: hexagonal
Bolts: round (slotted)
Steel with a Black metallic finish
7.0(mean)
7.2
Comments
Mixed selection of black parts including T-shaped Trunnions. *1 Probable, for plastic Gears (in Gears set). Also coarser plastic Worm/Wheel, & coarse 8t Pinion meshing with slots in 63mm diameter Pulley's face.
The MCS document for this system is shown below. It can also be downloaded to your computer if desired here
NOTE : If the MCS document does not appear in the window below, then refresh the page.
The report can be zoomed into, made full screen or downloaded as a pdf document by using the controls provided
Pages from the 'Other Systems Newsletter' which contain information on this system are shown below. They can also be downloaded to your computer if desired here
NOTE : If the 'Other Systems Newsletter' pages for DER JUNGE KONSTRUKTEUR do not appear in the window below, then refresh the page.
The report can be zoomed into, made full screen or downloaded as a pdf document by using the controls provided
Below there are manuals/leafets and photos which can be downloaded by clicking on the appropriate image.